Saturday, August 16, 2014

Heart Shaped Serial LED Flasher using 4017 and 555 IC

This circuit uses the 555 IC and 4017 IC to flash the LED's one by one placed in shape of a Heart shaped , hence named LED flasher circuit.
The 4017 is a decade counter which flashes the LED's one by one depending upon the clock signal received by it , here 555 produces clock signal and thus drives the 4017 IC to produce output at its pins.
The output LED's can be easily connected in a Heart Shape in order to Make a nice flashing Heart effect.This circuit can be made on a PCB and can be given to your loved ones , thus making it a perfect home made DIY electronic gift for your loved ones.

The speed of flashing can be controlled by the variable resitor , higher the value the slowly LED's will flash and slower the resistance value , the faster the LED's will Flash.
Also the Capacitacnce at pin 2 if 555 can be changed to get particular speed of flashing of LED's.

COMPONENTS REQUIRED :

1.one 555 IC
2.one 4017 IC
3.one 100k Resistor
4.one 100k Variable resistor
5.one 1uF Electrolytic capacitance
6.one 220R resistance
7.eight RED LED's
8.one 6-12v supply







1 comment: